Tekno RC Shock Boots, Long, Rear EB/NB/SCT, Front ET/NT, 2 Pieces

About this part

Two shock boots sized for 122mm shocks. The captured design resists tearing and gives stronger protection from dirt and debris, while leaving suspension movement unrestricted. Each boot is cut to length for its shock so it will not get caught or pinched between the spring perch and rod end during assembly. Fit the boots before threading the rod end onto the shock shaft.

Features

• Strong protection against dirt and debris
• No loss of up-travel or performance
• Lasts longer than standard shock boots
• Simpler spring and perch installation than standard boots

Note

• Requires TKR6140 locking spring perches and rod ends.
• Available in three lengths, measured from shock cap center to pivot ball center:
• 107mm: SCT410, SCT410.3, EB48, EB48.2, EB48SL and NB48 front shock
• 122mm: SCT410, SCT410.3, EB48, EB48.2, EB48SL and NB48 rear shock, plus ET48, NT48, EB48.3 and NB48.3 front shock
• 137mm: ET48, NT48, EB48.3 and NB48.3 rear shock
• Fits: Tekno 1:8 EB48 2.0, ET48 2.0, NB48 2.0, NB48 2.1, NT48 2.0 and NT48.3

Fits