Home / Hot Racing / Tools / SD488E
30-day returns · Secure checkout by Stripe · We accept Visa, Mastercard, American Express, Discover, Apple Pay, Google Pay and Link
A clamp jig from Hot Racing for soldering RC connectors. It grips, holds, and releases each connector quickly and securely while you work. It holds the most common RC connectors: XT60, T-Plug, TRA/TRX, EC-2, EC-3, EC-4, EC-5, micro 2-pin to 4-pin, and bullet connectors from 2 to 6.5 mm. It can also serve as a motor holder for both 5 mm and 1/8 inch motor shafts. Fits: HPI Electric RS4, HPI Electric Pro 2, HPI Electric MT (electric), HPI Electric Pro 4, HPI Electric Mini (electric), HPI Electric Sport. IN THE BOX: One Hot Racing RC connector soldering clamp jig. SOLDERING STEPS: 1) The iron must be very hot. 2) Tin the wire and the connector pin with a good amount of solder. 3) Place the wire and pin together and hold the very hot tip against them until the solder melts. 4) Remove the tip from the joint and let it cool. WARNING: The main hazard is joining positive and negative wires, which creates a short circuit. Keep one wire properly insulated at all times, and clamp only one pin at a time from the same battery.
