RPM R/C Products Revo/Slayer Axle Carriers & Oversized Bearings, Blue

About this part

A set of optional RPM axle carriers and steering blocks in blue for the Traxxas Revo. They also work on the E-Maxx and T-Maxx 2.5R and 3.3 versions.

Features

• Molded composite material, blue in color
• Wall thickness around the pillow-balls is 40% greater, which eliminates split walls
• More than 20% additional material supports the pillow-balls and keeps them from pulling through
• Reinforcing rib behind the tie rod mount is redesigned
• Boot lock tabs are redesigned for easier removal of the silicone boots
• Press-fit bearings in the carrier reduce axle movement
• Two-piece pillow-ball set screws use aluminum and Delrin for strong hold under extreme conditions

You will receive

• Two axle carriers and steering blocks
• Two 12x21x5mm inner bearings
• Two 6x15x5mm outer bearings
• Four aluminum set screws
• Four Delrin bushing caps
• Instruction sheet

Requirements

• Installs on the axles with no modifications.

Comments

• Replacement bearing set RPMC8570. Replacement pillow-ball set screws RPMC0800. Do not use the Traxxas #5356 Long Travel Rocker Arm Set with these carriers, or the RPM warranty is void.

Fits