PowerHobby Aluminum Cooling Fan, 1/8, Blue

About this part

A blue aluminum cooling fan for 1/8 scale motors. The heat sink clips onto the motor and has an anodized finish with multiple fins for added cooling surface area. A twin cooling fan runs off a standard 2-pin Rx plug. Keeping motor temperatures down helps the motor run efficiently.

Note

• Unless specified otherwise, these fans are designed for DC power between 5.0V and 6.0V maximum. Running them above 6.0V is at your own risk. Make sure the power source, such as a battery pack, receiver or ESC, can supply a steady voltage between 5.0V and 6.0V.
• If you power the fans from an ESC, confirm with the ESC maker that it can supply enough auxiliary power. Some ESCs with built-in fans may not reliably power additional fans.
• Fits: Kyosho Inferno, Kyosho MP5, Kyosho MP6 / 7.5 / 777, Duratrax Axis, Sportwerks Mayhem, Losi 1:8 8ight Nitro

Fits